Water

Water Roller

Inflatable water roller · PVC or TPU, 8 to 13 ft

A clear inflatable water roller made of PVC or TPU that a rider walks, runs and rolls inside on a pool or calm water, in sizes from 8 x 8 ft to 9 x 13 ft.

Size4 options see below
Capacity1 at a time
Lead time7 to 20 days
MaterialPVC, TPU
ValveScrew valve with cap
UsePools and calm water

Price & terms

InstallationDIY
ShippingExtra, at actual

From ₹54,000 Price for the model shown, subject to stock and current rates. GST extra, shipping at actual.

MATERIAL

SIZE

Clear

Shipping extra at actual · installation quoted separately · taxes extra as applicable · GST 18%

Warranty

As per the manufacturer's warranty terms, confirmed in your quotation.

Wear parts (ropes, harnesses, fabric and consumables) are replaced on a service cycle and are not under warranty.

Installation & shipping

Installation and shipping are not included in the price. Shipping is charged at actual.

Many items are DIY: you can set them up yourself with the setup guide.

Where technicians are needed, installation is quoted for your project: an hourly rate per technician for every hour from the moment they leave home for your site until they are back home, plus all conveyance, food, lodging and boarding, provided by the customer.

The quote depends on the items, quantities, sizes, complexity, your location and the mode of travel.

Your scope

These stay with you, and so does the saving.

Civil workElectricalPermissionsSite accessStorage

13ft Longest size
1rider At a time
7 to 20days Lead time
18%GST Applicable

Indicative figures. Price is quoted per site and excludes land, approvals and permits, site development and civil work, financing, GST and other taxes.

What it is

Run on water inside a giant wheel.

Riders step in, find their feet and run, rolling and tumbling across the pool while friends cheer from the side.

Features

Four things that decide it.

01

Rolls on water

A clear cylinder that floats and turns as the rider runs inside.

02

Four sizes

From 8 x 8 ft for kids up to 9 x 13 ft for adults.

03

PVC or TPU

PVC for value, TPU for better clarity and longer life.

04

Folds flat

Deflates and packs into a wheeled bag.

In motion

See it in motion.

Visitor gallery

What a guest actually sees.

Water Roller, in use — Aqua Zorbing Water Roller Inflatable for Pools · 8 X 8 feet, 9 X 9 feet, 9 X 11 feet, 9 X 13 feet

Pricing & sizes

Pick the size that fits your site.

Pick one and we quote it.

Size

Option

Price

₹75,000

TPU + 9 X 9 ft · best choice

Price for the model shown, subject to stock and current rates. GST extra, shipping at actual.

Shipping extra at actual · installation quoted separately · taxes extra as applicable · GST 18%

Work it out

Put your own numbers in.

Nothing here is fixed by us.

Comes in

-

Goes out

-

Left over

-

Build cost - back in-

Illustrative estimate, not a promise or guarantee. Your own figures will differ.

Excludes land, approvals, site development, financing, GST and management overhead.

Project requirements

Site prerequisites.

What has to be true of your site before this can go on it.

**The ground before anything is on it.** Everything below is what has to be true of it.

What comes in the bag
The kit shown has the folded roller, electric pump, hose, valves, tether, patches, glue, brushes and a wheeled bag, check the order list for your pack.
Full kit Supplied with the item
Inflate on deck
Lay the roller on a mat at the pool side and fill it with the electric pump.
2 people, 10 min You supply
Pool and ride area
Use a pool or inflatable pool with a deck, a blower point and cones to keep a queue line.
Pool side You supply
Air valve
Fill through the screw valve and close the cap tight before the roller goes in the water.
Screw cap Supplied with the item

Requirements vary with configuration and jurisdiction. Confirmed at consultation.

Technical drawing

Size and layout

3.4m
Length: 2.7m
Width: 2.7m
Height: 9.2m²
Footprint

AIsometricmm

BFront elevationmm

CPlanmm

	A · Specification	B · Value
	Dimensions2
01	Overall size	3,350 × 2,740 mm
02	Height	2,740 mm
	Size1
03	Options	8x8, 9x9, 9x11, 9x13 ft
	Material2
04	Body	PVC or TPU, clear
05	Thickness	About 0.8 to 1 mm
	Fittings2
06	Valve	Screw valve with cap
07	Handles	Inner grab handles
	Use1
08	Riders	1 at a time
	Drawing5
09	Number	JK-D-225 · Rev A
10	Units	mm
11	Scale	Not to scale
12	Projection	Third angle
13	Status	For planning
	13 rows · indicative, confirmed in the written quotation

Indicative drawing for planning. Sizes, materials and layout are confirmed in the written quotation.

Details

More about this product

The water roller is a clear cylinder with open ends and an inner tube, so the rider steps in, stands up and runs to make it roll across the water. It is a popular paid ride at water parks, pool sides and events.

Highlights5

Sizes: 8 x 8 ft, 9 x 9 ft, 9 x 11 ft, 9 x 13 ft
Material: PVC or TPU, clear
Grab handles inside for the rider
Screw air valve with cap
Use on pools, inflatable pools or calm shallow water

More detail1

It is filled with an electric air pump through a screw valve and folds flat for storage. Choose PVC for value or TPU for better clarity and cold weather flexibility.