Inflatable

Bouncy Robot

Bounce house with slide · approx. 20 x 17 x 14 ft

A bright bounce house with robot and snail figures, a jumping area, mesh windows, an inside climb and a slide. Sized for parks, events and play zones.

Height14ft - 20ft
Size19.69 x 17.06 x 14.1 Ft
Length15ft - 20ft
Width15ft - 20ft
Lead time15 to 30 days
Add-ons1 Air Pump, Repair kit

Price & terms

InstallationDIY, or by technicians at a quoted charge
ShippingExtra, at actual
GST18%

From ₹4,10,000 Tentative price for the standard configuration. The real quote is given after we understand the quality, quantity, size, materials, location, budget and current material prices.

Adds this to your project list. Add more products, then send one enquiry for the whole site.

Shipping extra at actual · installation quoted separately · taxes extra as applicable · GST 18%

Made to order and supplied as part of a turnkey project. Projects start at ₹2 Cr, and single items are not sold separately. The price shown is tentative: the real quote is given after we understand the quality, quantity, size, materials, location and budget.

Warranty

As per the manufacturer's warranty terms, confirmed in your quotation.

Wear parts (ropes, harnesses, fabric and consumables) are replaced on a service cycle and are not under warranty.

Installation & shipping

Installation and shipping are not included in the price. Shipping is charged at actual.

Many items are DIY: you can set them up yourself with the setup guide.

Where technicians are needed, installation is quoted for your project: an hourly rate per technician for every hour from the moment they leave home for your site until they are back home, plus all conveyance, food, lodging and boarding, provided by the customer.

The quote depends on the items, quantities, sizes, complexity, your location and the mode of travel.

Your scope

These stay with you, and so does the saving.

Civil workElectricalPermissionsSite accessStorage

20 x 17ft Footprint
14ft Height
6 to 10kids At a time
18%GST Applicable

Indicative figures. Price is quoted per site and excludes land, approvals and permits, site development and civil work, financing, GST and other taxes.

What it is

Jump, climb and slide in one bright castle.

Kids bounce with the robots, climb up inside and race down the slide while parents watch through the mesh.

Features

Four things that decide it.

01

Robot theme

Robot and snail figures make it stand out at any event.

02

Many kids at once

A wide bounce area keeps a group busy together.

03

Mesh windows

Parents can see in and air keeps moving.

04

Blower powered

Electric blowers inflate it in minutes.

In motion

See it in motion.

Visitor gallery

What a guest actually sees.

Bouncy Robot, in use — Bouncy Robot Inflatable Slide Bounce House · 14ft - 20ft

Pricing & sizes

Pick the size that fits your site.

Pick one and we quote it.

Size

Option

Price

From ₹5,33,000

Pro + 19.69 x 17.06 x 14.1 ft · heavy duty · best choice

0.9 mm heavy-duty PVC, double stitched and reinforced seams, UV-stable print and a spare blower. · Best material for the price

Get this quoted

None of these fit?

Custom · designed for your site

If your ground, footfall or budget does not suit the options above, we have it designed to your figures instead.

Any sizeSurvey-ledTurnkey delivery

Price After survey Talk through your site ↗

Tentative price for the standard configuration. The real quote is given after we understand the quality, quantity, size, materials, location, budget and current material prices.

Shipping extra at actual · installation quoted separately · taxes extra as applicable · GST 18%

Work it out

Put your own numbers in.

Nothing here is fixed by us.

Comes in

-

Goes out

-

Left over

-

Build cost - back in-

Illustrative estimate, not a promise or guarantee. Your own figures will differ.

Excludes land, approvals, site development, financing, GST and management overhead.

Project requirements

Site prerequisites.

What has to be true of your site before this can go on it.

**The ground before anything is on it.** Everything below is what has to be true of it.

What is in the box
The packed castle with electric blowers, blower sleeves, ground stakes, tie ropes, repair patches, a mallet and carry bag.
1 set Supplied with the item
Setting up
Two or three people unroll the castle, connect the blower and stake the sides as it fills.
Approx. 30 to 45 minutes You, or technicians at a quoted charge
Blower and anchor
The blower tube ties onto the inlet sleeve and each D ring is staked to the ground.
Steady power point You supply
Clear flat site
A flat lawn or ground sheet with cones, blowers in place and a power point close by.
Approx. 25 x 22 ft You supply

Requirements vary with configuration and jurisdiction. Confirmed at consultation.

Technical drawing

Size and layout

6m
Length: 5.2m
Width: 4.3m
Height: 31m²
Footprint

AIsometricmm

BFront elevationmm

CPlanmm

	A · Specification	B · Value
	Dimensions4
01	Overall size	6,000 × 5,200 mm
02	Height	4,300 mm
03	Clear zone	1,500 mm all round
04	Site needed	9 × 8.2 m, 74 m²
	Size3
05	Length	Approx. 19.69 ft
06	Width	Approx. 17.06 ft
07	Height	Approx. 14.1 ft
	Build1
08	Material	Commercial PVC tarpaulin
	Power1
09	Blower	Electric air blower
	Package1
10	Included	Blower, repair kit
	More3
11	Material	Commercial PVC tarpaulin
12	Play zones	Bounce area, climb ramp, slide
13	Users	Approx. 6 to 10 kids at a time
	Drawing5
14	Number	JK-D-302 · Rev A
15	Units	mm
16	Scale	Not to scale
17	Projection	Third angle
18	Status	For planning
	18 rows · indicative, confirmed in the written quotation

Indicative drawing for planning. Sizes, materials and layout are confirmed in the written quotation.

Details

More about this product

Bouncy Robot is a commercial bounce house in purple, yellow, green and red, with red and yellow robot figures at the front and snail figures on the towers. Kids jump inside a netted bounce area, climb a ramp and come down the slide.

Highlights6

Inflated size approx. 19.69 x 17.06 x 14.1 ft
Bounce area, climb ramp and slide
Mesh windows for airflow and supervision
Robot and snail figures for theme
Comes with blower and repair kit
Lead time 15 to 30 days

More detail2

It measures about 19.69 x 17.06 x 14.1 ft when inflated. Electric blowers keep it up while in use, and it packs down into a carry bag for storage and travel.

Use it at parks, malls, schools, birthday parties and events. Place it on a flat lawn or ground sheet with a power point nearby.