Water Hoverboard Kit for Lakes and Water Sports Centres

Rides

Water Hoverboard

Jet powered hoverboard · runs off a jet ski

A water hoverboard rig that uses the thrust of a jet ski, through a long hose, to lift a rider above the water on a board with fixed boots.

Capacity1 at a time
Lead time15 to 30 days
ModelJet ski powered water hoverboard
Power unitJet ski (not included)
HoseLong high pressure hose, about 18 m typical
Water depthAbout 3 m or more in the ride zone

Price & terms

InstallationDIY, or by technicians at a quoted charge
ShippingExtra, at actual

From ₹5,50,000 Tentative price for the standard configuration. The real quote is given after we understand the quality, quantity, size, materials, location, budget and current material prices.

Adds this to your project list. Add more products, then send one enquiry for the whole site.

Shipping extra at actual · installation quoted separately · taxes extra as applicable · GST 18%

Made to order and supplied as part of a turnkey project. Projects start at ₹2 Cr, and single items are not sold separately. The price shown is tentative: the real quote is given after we understand the quality, quantity, size, materials, location and budget.

Warranty

As per the manufacturer's warranty terms, confirmed in your quotation.

Wear parts (ropes, harnesses, fabric and consumables) are replaced on a service cycle and are not under warranty.

Installation & shipping

Installation and shipping are not included in the price. Shipping is charged at actual.

Many items are DIY: you can set them up yourself with the setup guide.

Where technicians are needed, installation is quoted for your project: an hourly rate per technician for every hour from the moment they leave home for your site until they are back home, plus all conveyance, food, lodging and boarding, provided by the customer.

The quote depends on the items, quantities, sizes, complexity, your location and the mode of travel.

Your scope

These stay with you, and so does the saving.

Civil workElectricalPermissionsSite accessStorage

1rider Per session
15 to 20min Typical session
3+m Water depth
18%GST Applicable

Indicative figures. Price is quoted per site and excludes land, approvals and permits, site development and civil work, financing, GST and other taxes.

What it is

Fly a few metres over the water.

Riders feel the lift under their feet, learn to balance in a few minutes and end the session carving turns above the lake, with friends watching from the jetty.

Features

Four things that decide it.

01

Runs off a jet ski

The board uses jet ski thrust through the hose, so no separate engine is needed.

02

Hover and carve

Riders lift above the surface and lean to turn and glide.

03

Operator controlled

The jet ski operator sets the throttle, so height stays under control.

04

Crowd puller

A rider in the air draws people to the shore and the booking counter.

In motion

See it in motion.

Visitor gallery

What a guest actually sees.

Water Hoverboard, in use — Water Hoverboard Kit for Lakes and Water Sports Centres · 1 at a time

Pricing & sizes

Pick the size that fits your site.

Pick one and we quote it.

Size

Option

Price

From ₹7,15,000

Pro + Heavy duty · best choice

1.0 mm reinforced PVC, UV-stable colours, quick connectors and a spare parts kit. · Best material for the price

Get this quoted

None of these fit?

Custom · designed for your site

If your ground, footfall or budget does not suit the options above, we have it designed to your figures instead.

Any sizeSurvey-ledTurnkey delivery

Price After survey Talk through your site ↗

Tentative price for the standard configuration. The real quote is given after we understand the quality, quantity, size, materials, location, budget and current material prices.

Shipping extra at actual · installation quoted separately · taxes extra as applicable · GST 18%

Work it out

Put your own numbers in.

Nothing here is fixed by us.

Comes in

-

Goes out

-

Left over

-

Build cost - back in-

Illustrative estimate, not a promise or guarantee. Your own figures will differ.

Excludes land, approvals, site development, financing, GST and management overhead.

Project requirements

Site prerequisites.

What has to be true of your site before this can go on it.

**The ground before anything is on it.** Everything below is what has to be true of it.

Ride zone survey
The ride area is checked from a boat with a depth sounder, buoys are laid out and distances from the jetty are measured.
Depth 3 m or more You and JumpKing
Jet ski commissioning
The hose is connected to the jet ski outlet, the board and boots are checked and the power unit is tested at the jetty.
1 jet ski You, or technicians at a quoted charge
Rigging crew
A small crew launches the jet ski, carries the board and hose, and sets out life jackets, helmets, tools and fuel cans.
3 to 4 people You supply
Instructor training
Instructors practise briefings, boot fitting, hose handling and rescue drills on the jetty and in the water.
Before opening On request, quoted

Requirements vary with configuration and jurisdiction. Confirmed at consultation.

Technical drawing

Size and layout

1.1m
Length: 0.5m
Beam: 0.3m
Height: 0.5m²
Footprint

AIsometricmm

BSide elevationmm

CPlanmm

	A · Specification	B · Value
	Dimensions4
01	Overall size	1,100 × 450 mm
02	Height	250 mm
03	Clear zone	3,000 mm all round
04	Site needed	7.1 × 6.5 m, 46 m²
	Board2
05	Bindings	Adjustable boots fixed to board
06	Thrust	Nozzle under the board
	Hose1
07	Length	About 18 m typical
	Power1
08	Source	Jet ski, not included
	Site2
09	Water depth	About 3 m or more
10	Zone	Buoyed area clear of boats and swimmers
	Supply1
11	Lead time	15 to 30 days
	Drawing5
12	Number	JK-D-37453 · Rev A
13	Units	mm
14	Scale	Not to scale
15	Projection	Third angle
16	Status	For planning
	16 rows · indicative, confirmed in the written quotation

Indicative drawing for planning. Sizes, materials and layout are confirmed in the written quotation.

Details

More about this product

The water hoverboard is a board with bindings and a nozzle underneath, connected by a long red hose to a jet ski. The jet ski pushes water up the hose and the thrust lifts the rider into the air, where they lean to carve, turn and hover over a marked zone.

Highlights6

Hoverboard with adjustable boot bindings
Long high pressure hose with jet ski connector
Needs a jet ski as the power unit
Rides in a buoyed zone with safe depth
Rider in life jacket, with an operator on the jet ski
Price is for the hoverboard kit, jet ski not included

More detail1

It suits lakes, backwaters, calm bays and water sports centres that already run jet skis. JumpKing plans the zone, commissioning and training with you; the jet ski, licences and trained staff are arranged at your end.